The quality of wall surface has a direct influence on the decorative effect of wallpaper; it is a necessary step of wallpaper hanging.The requirements of wall surface are as below：
ONE
The wall surface should be even、dry、clean、same color、inside and outside bend corner straightness, no rough, no dirt, no pulverization and so on .
TWO
The wall surface should be moisture proof, after putting up the putty, paste primer、gloss oil or varnish.
ADHESIVE PREPARATION
ONE
Do use wallpaper adhesive and follow manufacturer's instructions.
TWO
Do not use adhesive which is for other material as board、glass、film and so on.
THREE
The stickiness of adhesive is an important factor that affects the installation of wallpaper, so we suggest using Yulan brand adhesive; Follows the instructions for adhesive preparation.
GENERAL PREPARATION
ONE
Brush off all dirt and loose material with a stiff bristle brush.
TWO
All surface contaminations such as dirt, grease, polish, water soluble stains, felt tip pen marks, etc., should be removed by washing with a detergent solution, rinsed off with clean water and allowed to dry.
THREE
Mould and Algae should be treated with a fungicidal wash and use in accordance with the pack instructions and allowed to dry.
FOUR
Any holes, cracks or defects to be filled flush with good quality filler, used in strict accordance with the manufacturer’s instructions.
FIVE
All substrates should be dry in depth.
COMMON LOGOS OF WALLPAPER DESCRIPTION
Our wallpapers give a true aesthetic and vibrant look to your walls in a range of 10,000+ themes and designs,
1216-006,Unit B,Third Floor,No.2 Building.Yihe ThreeRoad,Comprehensive Free Trade Zone,Linyi City,Shandong Province
